SoClean 2 CPAP Sanitiser from SoClean

Tackle red marks and skin irritation with the SoClean 2 sanitiser

If you’re experiencing red marks and skin irritation from your CPAP mask, it is likely to be caused by bacteria. Over time, the mask material begins to degrade, creating microscopic pockets that are a perfect home for bacteria. Even the most thorough cleaning is unlikely to remove all of the bacteria, and so even a visibly clean mask can be home to bacteria and cause you to wake up with red marks and skin irritation. The solution to this, is to use a sanitising unit.

Keep your CPAP equipment free of bacteria with SoClean 2

The SoClean 2 kills 99.9% of CPAP germs and bacteria in the mask, hose and reservoir with no water, no chemicals and no disassembly needed.

When using CPAP, all of the air entering your lungs first travels through your machine, tube and mask. SoClean is the simple way to sanitise all of your equipment, ensuring it is hygienic and odour-free.

While mask cleaning is relatively easy, keeping the machine and tubing bacteria-free is far less so. However, SoClean makes a near-impossible task into a simple part of your routine cleaning. It takes a minute to start the cleaning process, and you can then leave the SoClean to sanitise your equipment. You can then use your CPAP that night knowing it is clean, sanitised, and odour-free.

The SoClean CPAP cleaner and sanitizing machine uses activated oxygen cleaning to eliminate any germs and bacteria that may be lingering in your home CPAP machine.

SoClean 2 Features:

• Sleek design and tiny footprint of just 11 inches x 11 inches (28 cm x 28 cm)
• LCD display
• Indicator lights throughout the cycle
• Left or right hose insertion option
• Easy filter cartridge system
• 1 Year Warranty and 30 day money back guarantee for extra peace of mind!
• UK & EU Adapter plugs

Please note that some promotional videos you may have seen refer to a sample of the SoClean Neutralising Pre-Wash; for regulatory reasons this sample is not included with SoClean units sold in the UK and Europe, though a full bottle can be ordered here if desired.

---

Compatibility

The SoClean 2 CPAP cleaner uses a universal fitting to integrate into the majority of CPAP models. Some CPAP models – particularly those that incorporate a heated hose or humidifier – will need an adapter. Please find your machine in the list below to confirm if you need an adapter or not. All adapters are discounted to £10 when purchased with a SoClean 2.

In short, if your CPAP machine does not have an in-built heated hose, then no adapter is required with the exception of the Transcend, Z1, AirMini and DreamStation GO travel machines. However, please find your machine in the list below to confirm. If in doubt, please contact us.

ResMed
Any ResMed machine (other than AirMini) without a humidifier attached – no adapter required
S8 without a humidifier – no adapter required
S8 with a humidifier – no adapter required
S9 without a humidifier – no adapter required
S9 with a humidifier – Adapter #1 required
AirSense 10 without a humidifier – No adapter required
AirSense 10 with a humidifier – Adapter #2 required
AirMini – Adapter #3 required*

Philips Respironics
Any Philips Respironics (other than DreamStation GO) machine without a humidifier – no adapter required
System One with humidifier – Adapter #5 required
DreamStation with humidifier – Adapter #5 required
DreamStation GO – Adapter #3 required*

Fisher & Paykel
SleepStyle machines (2018- model) – Adapter #4 required
Icon and Icon+ Machines – Adapter #6 required
SleepStyle 600 Machines (pre 2014) – Adapter #7 required

Drive DeVilbiss
SleepCube with or without humidifier – no adapter required

Portable / Travel Machines
Somnetics Transcend Machines (includes Transcend Auto, II, T3 and T365) – Adapter #8 required*
HDM / Breas Z1 – Adapter #8 required*
DreamStation GO – Adapter #3 required*
ResMed AirMini – Adapter #3 required*

All other CPAP machines – no adapter required

*With travel devices, sanitising is limited to the tube and mask only.

If in doubt, please contact us.

---

Do I need Anything Else?

The SoClean requires that you change the filter and check valve every 6 months. A Cartridge Filter Kit containing both needed items can be purchased here.

Try it RISK FREE for 30 days! Simply return it to us within 30 days, and we give you a full refund. The device must be returned complete, with all packaging and accessories, and in the same condition received. Please therefore ensure you take good care of the device during your trial period, as Intus reserve the right to deduct reasonable costs of repair or repackaging if required. Please note that any delivery costs cannot be reimbursed.